UCDS Forum

Hello i hope that there are some one here that can help .
I am still struglleing with a mondeo with keyless entry not working and have given up on getting help from ford .
i think it migth be the files in the update made to bcm that are the problem .
The bcm is updated to the latest level with ucds but when trying with ford ids it say that it cant read serial number and is not able to reprogram it in the log it say this:
(BCMii) Reservedelsnummer = FU5T-14B
(BCMii)_FILENAME = FU5T-14C184-AAL
(BCMii) Software Part 1 (F16B) = FU5T-14F391-AAA
(BCMii) Software Part 2 (F16E) = FG9T-14G163-LA
(BCMii) Software Part 3 (F16C) = FG9T-14F390-KA
(BCMii) Software Part 4 (F10A) = FG9T-14C636-UF
(BCMii) Software Part 5 (F16D) = FG9T-14F389-AD
(BCMii) Software Part 6 (F17D) = FG9T-14G162-FF
(BCMii)_HARDWARE_NUM = FU5T-14F141-CAC
(BCMii)_CONFIGURATION_FILENAME = FG9T-14C636-UF
Standardmonterede moduler - OK - (BCMii)
i dont know if it is ithe rigth order they are listed
the vin number is : WF0FXXWPCFFK22538
if any has any thing to help with i will be happy
rgsd sev

Hi,

Errors in DTC? If there are no errors then ...

if you saved the As-Built data of the BCMii module before the update, use these, otherwise it will reload the AS-Built data from the official Ford website.

UCDS can retrieve the original AS-Built data of your vehicle directly from the Ford site, inserting your VIN.

The current calibration of your GWM module is FG9T-14F530-AB.

-- I would advise you to update the GWM first -- The last Calibration should be HG9T-14F530-AE

Try and let us know.