UCDS Forum

I tried to update the abs module on my ford mondeo mk4.5 from 2011 but the flash failed. I tried to do a force update but it didn't recognize the module anymore, I can load the ucds software update files but it didn't save it before I started the update. Anyone know how to procede now?

VIN is WF0GXXGBBGxxxxxxxxxxxx

Partnumber of the module is CG91-2C405-FC (not the original module, the orginal module was a CG91-2C405-CC

Use VBF loader set DeadMode

HW Part : CG91-2C405-FC
Select SBL:
6G91-14C039-FB
#1 CG91-14C036-FD
#2 CG91-14C037-FD

Thanks! it worked

Is there anyway to find out which files are needed for a specific module?

Hi same story here but unfortunately I dont know ABS module number
Just tried to update ABS module on my car and update procedure has failed now I can not communicate with ABS module nad cant start engine
my car is Ford Mondeo BA7 MK4.5 model year 2011 with 1,6 TDCI 115 engine start-stop VIN: WF0EXXGBBEBL21882
any suggestions what can I do? any chance to reactivate bricked module with UCDS of should I take car to the dealer straight away?

Use VBF Loader:
SBL: 6G91-14C039-FB
#1:CG91-14C036-CD
#2:CG91-14C037-CD

Thanks worked for me as well
Darek

You can tell me what files I can use for the currently dead ABS module?


VIN: WF0SXXGBWS6J08581
Module Name: ABS
F113 - ECU Delivery Assembly Number : 6G91-2M110-AG
ECU Hardware Number : 6G91-14C228-AB
F18C - ECU Serial Number : 00023338

6G91-2D053-AD
sbl 6G91-2D052-AB

Доброго времени суток
помогите и мне решить такую роблемму
при обновлении лег модуль абс
мондео 4 вин WF__0DXXGBBDAB80728
это кусок из файла сессии
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="BG91-2C405-FB"/>
<d DID="F120" Desc="ECU Software #2 Part Number" Data="BG9N-14C381-AC"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="BG91-14C037-FB"/>
<d DID="F162" Desc="Software Download Specification Version" Data="0x03"/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x02"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="BG91-14C036-FB"/>
<d DID="F191" Desc="Vehicle Manufacturer ECU Hardware Number" Data="AG91-14C227-FA"/>
какие мне нужны файлы для заливки в деад моде и последовательность файлов (ну и главное где их взять? я чет с этого списка выше ни одного файла не смог найти)