SYNC3 - Reinstalling Stock Software

[totga]

Hi,
did you download the update package from this location?

https://drive.google.com/drive/folders/ ... i_oMcp0Oep

SYNC3_3.0.18025_WF0VXXGCEVHJ12972.zip

........

Hi Diamondear,

thx very much, this version actually and finally worked. It went the same way like the previous runs but at the end it was a different message that said nothing like before: to remove the usb at completely shut the system down (e.g.: open the door and wait til it switches off). Then after the restart I finally had v3.0 b18025 !!!!!

Thanks again for your help!

Now I just need to update the map somehow...

Regards!

[Diamondear]

Many ask me how to turn your Sync3 with US navigation in Europe navigation.

Unfortunately, this transformation is not possible for Sync3 with US navigation, because it has the storage memory of only 32GB, while
the European one has 64GB.

European cartographic maps are very large in capacity.

If Ford were to create maps divided by countries or regions, then it will be possible, but until then it is not possible to do so.

If you want to know for sure the maximum capacity of your Sync3, start this script as if it were an update.

https://drive.google.com/open?id=1rFNb4 ... hez0KVfije

At the end a file will be created in the SyncMyRide folder called: Sync_Serial_Vin.xml.

Read this information at the end and if the value "/fs/images/" is less than 55G, then the transformation is not operable.

<d2p1:PartitionHealth type="/fs/usb0/" total="29G" available="13G"/>
<d2p1:PartitionHealth type="/fs/tmpfs/" total="128M" available="127M"/>
<d2p1:PartitionHealth type="/fs/sd/MAP/" total="1.5G" available="4.5M"/>
<d2p1:PartitionHealth type="/fs/sd/MAP/" total="14G" available="79M"/>
<d2p1:PartitionHealth type="/fs/Nuance/" total="16G" available="867M"/>
<d2p1:PartitionHealth type="/fs/Nuance/" total="1.8G" available="93M"/>
<d2p1:PartitionHealth type="/fs/Nuance/grace" total="1.0G" available="5.5M"/>
<d2p1:PartitionHealth type="/fs/rwdata/" total="1024M" available="677M"/>
<d2p1:PartitionHealth type="/fs/mp/" total="1024M" available="173M"/>
<d2p1:PartitionHealth type="/fs/images/" total="55G" available="18G"/>
<d2p1:InstallationLog/>

[vabea]

Thanks Diamondear for your share.
I´m want to install the maps you have shared in the folder "Maps F7.Q1" in this folder you have two diferente versions, can you explain me the difference between them.

regards

[tomek3232]

If you try to update sync 3 without navigation from software version 2.0 to 3.0, you'll get the error "Error Code: MEM_ERR01"
Can anyone help me ?

[kroligoff]

try run special procedure Sync3 Clear all user data

[Diamondear]

If you try to update sync 3 without navigation from software version 2.0 to 3.0, you'll get the error "Error Code: MEM_ERR01"
Can anyone help me ?

You must use this package to update your Sync3 without NAV.

My Google Drive:

https://drive.google.com/drive/folders/ ... g8x2FyZfSk

[filu02]

I have non nav US mustang 2017
When i try upload original software (SYNCGen3.0_3.0.18025_PRODUCT) for Us there is no problem.
But when i try upload EU version i always have message Err_Mem003

I try add to US software add only lunguage pack and the error always become.
Ofcorse i modify the autoinstall to upload the with JR3T-14G391-AD

Have some one idea what i can do with this?

update
I read that the US non nav unit have 8gb and the EU non nav unit is 16gb. I know that there is a chance to write the EU software in to 8gb unit but how?
I can pay for solution.

[flexfuel]

Hi everyone,

I have been trying to add polish language to US Sync 3

I have US Sync 3 with Navi.
Got the car with version 2.2. Updated to 3.0 US using VIN number from owner.ford.com.
Then I installed sync3 v 3.0 version EU for cars with navigator (data from Diamondear cloud) and got the meesage that update was successful.

Everything seems to be fine but I cannot select any others EU language from General settings. There exist only the same English, Espanol and French like was before in US version. EU languages are not available for sellection.
In the attachment I send printscreen from IVSU

I will be very grateful for help.

[DanMc85]

Hi everyone,

I have been trying to add polish language to US Sync 3

I have US Sync 3 with Navi.
Got the car with version 2.2. Updated to 3.0 US using VIN number from owner.ford.com.
Then I installed sync3 v 3.0 version EU for cars with navigator (data from Diamondear cloud) and got the meesage that update was successful.

Everything seems to be fine but I cannot select any others EU language from General settings. There exist only the same English, Espanol and French like was before in US version. EU languages are not available for sellection.
In the attachment I send printscreen from IVSU

I will be very grateful for help.

You need to change the country code in the As-Built (7D0-02-01) or Direct Config (DE01)... It is probably set to USA (5553) still. You need to change it to PL (504C)

[flexfuel]

You need to change the country code in the As-Built (7D0-02-01) or Direct Config (DE01)... It is probably set to USA (5553) still. You need to change it to PL (504C)

Today i had changed it and it worked. Now i have several EU languages to choose. Great thanks to DanMc85, who was very kind and gave me solution.

[jarosss]

Hello,
How can I upgrade my US Sync to EU 3.0.18025 ?
Just install language pack or full package from Diamondear's shared drive?

[Diamondear]

Hello,
How can I upgrade my US Sync to EU 3.0.18025 ?
Just install language pack or full package from Diamondear's shared drive?

Ciao,
esattamente come dici. Puoi tranquillamente installare uno dei miei pacchetti già confezionati.

Installa la versione 3.0.18025 NAV o altrimenti il NO NAV.

Attenzione se hai già installato la versione 3.0.18025 NA, devi modificare il file autoinstall.lst del mio pacchetto per forzare l'aggiornamento, altrimenti il sistema ti notificherà che è già installata la versione.

[cantaloop.li]

Is there any new 3.0 Build on Ford servers? Can anyone check?
I have an anoying bug with traffic sign recognition. Ford knows about this problem and
should deliver a fix in a new Build.

[bartekwww]

Hello
I made updates sync 3 1.1 to 2.2 build 16280 without navi
I need to update the EU H language package
with the update attempt HN1T-14G391-AC_57604.tar I have a message
MEM_ERR03 PLEASE ASK FOR HELP

[changbom]

Hi. I have ford focus sync 3 with NAV. i want to change Navi map from US to Vietnam . Got sync 3 update from Ford ranger with sync 3 NAV with Vietnam map.

Do i have to change to : [SYNCGen3.0_ALL] in autoinstall.lst to make it work on my car.

here is list of my sync update
GB5T-14G386-AA.tar.gz
HB5T-14G386-TCB.tar.gz
HB5T-14G386-THA.tar.gz
HB5T-14G387-AAB.tar.gz
JR3T-14G381-AL.tar.gz
JR3T-14G391-FE.tar.gz
JR3T-14G423-FA.tar.gz