Hello,
I updated my Ford Galaxy with a rear Camera. I renew the wire
harness in the rear door and installed the camera.
But who knows which direct configuration I have to do?
SYNC3, BCM ...? and which block?
Galaxy 2017 Upgrade SYNC3 rear Camera
Модератор: DanMc85
-
- Сообщения: 2
- Зарегистрирован: 28 апр 2018, 08:53
-
- Сообщения: 25
- Зарегистрирован: 02 май 2017, 23:35
- Откуда: Germany
Re: Galaxy 2017 Upgrade SYNC3 rear Camera
For activating rear view Camera (RFC) with Forscan:
APIM 7D0-01-01 set Bit 6 to '1'
and with UCDS:
Modul (1) - Config Block (2) - Option Number (3)
APIM - 1 - 5
APIM 7D0-01-01 set Bit 6 to '1'
and with UCDS:
Modul (1) - Config Block (2) - Option Number (3)
APIM - 1 - 5
-
- Сообщения: 69
- Зарегистрирован: 01 фев 2018, 23:16
Re: Galaxy 2017 Upgrade SYNC3 rear Camera
did you have the correct harness behind the sync? I know I need to the replace the harness i the rear.
-
- Сообщения: 1
- Зарегистрирован: 07 янв 2019, 04:11
Re: Galaxy 2017 Upgrade SYNC3 rear Camera
Good day,
Could you give harness OEM code with electric tailgate & rear view camera .
Thanks in advance.
Could you give harness OEM code with electric tailgate & rear view camera .
Thanks in advance.
-
- Сообщения: 18
- Зарегистрирован: 26 мар 2018, 13:09
Re: Galaxy 2017 Upgrade SYNC3 rear Camera
Smax 2 has no choices in Direct Configuration, what to choose to make changes ???? Mondeo 5 / Fusion?
-
- Сообщения: 343
- Зарегистрирован: 30 янв 2013, 01:44
- Откуда: Czech Republic
Re: Galaxy 2017 Upgrade SYNC3 rear Camera
yes, try Mondeo 5 / Fusion