Ford Focus 2015 reflash ABS module

Модератор: DanMc85

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

Hey all,

Does anybody know if I can reflash ABS module on a ford focus 3, 2015 model. Per mistake I used the upgrade ABS funtion intended for focus 2011-2014.
Now I have a error with ABS module about wrong firmware. Is there a site to download firmwares for modules? I have the hardware number to find correct firmware.

Thanks!
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

nielsicq
Сообщения: 69
Зарегистрирован: 24 май 2013, 23:23
Откуда: The Netherlands

Re: Ford Focus 2015 reflash ABS module

Сообщение nielsicq »

Fiesta MK8 ST-Line

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Re: Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

Use VIN/chassisnr to download?
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Ford Focus 2015 reflash ABS module

Сообщение zaqik »

use firmware number (not VIN)

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Re: Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

thanks! I need to pay attention to something particular when flashing the file? Don't wanna brick my ABS module or do something to make it worse..

BTW: how do I know the right firmware version if I'm on the wrong one at the moment? Can I find it somewhere using the hardware nr?
HW: F1FC-2C405-AF
SW: ??? no idea, can someone with a european/belgian focus maybe check his ABS module sw nr in focccus or ucds?
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Ford Focus 2015 reflash ABS module

Сообщение zaqik »

<m module="ABS">
<d DID="F108" Desc="ECU Network Signal Calibration Number" Data="F1FC-14C381-AE"/>
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-F1FC-2C405-AF"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="F1FC-14F067-AA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="F1FC-2C405-AF"/>
<d DID="F162" Desc="Software Download Specification Version" Data="0x05"/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="F1FC-14C036-AF"/>
</m>

or

ABS;F1FC-2C405-AF;F1FC-14C036-AF;F1FC-14F067-AA

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Re: Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

zaqik писал(а):<m module="ABS">
<d DID="F108" Desc="ECU Network Signal Calibration Number" Data="F1FC-14C381-AE"/>
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-F1FC-2C405-AF"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="F1FC-14F067-AA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="F1FC-2C405-AF"/>
<d DID="F162" Desc="Software Download Specification Version" Data="0x05"/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="F1FC-14C036-AF"/>
</m>

or

ABS;F1FC-2C405-AF;F1FC-14C036-AF;F1FC-14F067-AA
Thanks, for some reason I'm getting an error with downloading F1FC-14C036-AF calibration file, no permission to download or something like that..
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Ford Focus 2015 reflash ABS module

Сообщение zaqik »

attachment
У вас нет необходимых прав для просмотра вложений в этом сообщении.

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Re: Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

Flashing went ok, I also did an intialize off the ABS module, still my ESP, ABS and hand brake light are on while engine is running, any ideas?

Error codes are:

Код: Выделить всё

===PCM DTC P160A:00-2F===
Code: P160A - Control Module Vehicle Options Reconfiguration Error

===ABS DTC U2300:55-2B===
Code: U2300 - Central Configuration

Additional Fault Symptom:
 - Not configured

===ABS DTC U2300:56-2B===
Code: U2300 - Central Configuration

Additional Fault Symptom:
 - Invalid/Incompatible Configuration

===HVAC DTC U2100:00-0A===
Code: U2100 - Initial Configuration Not Complete

===ACM DTC U201A:57-2F===
Code: U201A - Control Module Main Calibration Data

Additional Fault Symptom:
 - Invalid/Incompatible Software Component
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Ford Focus 2015 reflash ABS module

Сообщение zaqik »

krabappel2548 писал(а):I also did an intialize off the ABS module
what did you do?

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Re: Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

zaqik писал(а):what did you do?
It's fixed now, had to reset IPC and AS built to default one, then delete all DTC. Now everything is back to normal, all errors are away and lights are out again :)
BTW, is there a way to save PCM configurations from car? Or only upload to the car?
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Ford Focus 2015 reflash ABS module

Сообщение zaqik »

you mean PCM configuration or firmware from PCM ?

krabappel2548
Сообщения: 30
Зарегистрирован: 26 сен 2016, 11:41

Re: Ford Focus 2015 reflash ABS module

Сообщение krabappel2548 »

zaqik писал(а):you mean PCM configuration or firmware from PCM ?
My car has chiptuning, so if I take it to the dealer for maintenance, I'd like to switch between original engine software and my chip if possible :)
Ford Focus Clipper ST-line 2018, 1.5 ecoboost 150hp, titanium grey, chipped to 190hp & 290nm :evil:

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Ford Focus 2015 reflash ABS module

Сообщение zaqik »

you mean download firmware from PCM ... software UCDS has not this functionality

Аватара пользователя
jimbojambojumbo
Сообщения: 63
Зарегистрирован: 18 июн 2017, 17:26

Re: Ford Focus 2015 reflash ABS module

Сообщение jimbojambojumbo »

nielsicq писал(а):http://www.ucdsys.ru/calibration/

You Will need the original bootloader http://www.ucdsys.ru/calibration/

where can you find the original bootloaders if you know the name of the original firmware but not the original bootloader? I have worked it out i think by clicking on the calibaration level i can select the earlier version to download but the ipc files are not there the bcm files were the files i need for ipc are
G1ET-14C026-ABD VEHICLE MANUFACTURER ECU SOFTWARE
G1ET-14C026-ACC ECU SOFTWARE PART 2
G1ET-14C026-BSC ECU SOFTWARE PART 3

*partially resolved managed to download the files and install software but still do not have the function of the switches that became inoperable after updating it the first time*

Ответить