Have used UCDS to update wizard the BCM, PCM and IPC successfully on a 2006 S-Max Petrol. The HVAC wouldn't do it via the wizard so
Tried to update the HVAC using the VBF loader and now all it does is flash all the lights and not turn on.
I've tried:
- Flashing an earlier calibration
- Disconnecting -ve battery to reset
- Opening up and disconnecting the connectors to reset
6M2T-18D619-AE was the original calibration - does anyone have access to this file?
I have 6M2T-18D619-AF.vbf and 6M2T-18D619-AG.vbf as well as the later 7S7T-18D619-AD.vbf and 7S7T-18D619-AH.vbf but all of these whilst programmed do not resolve the issue.
Is there anything else I should have done when using the VBF loader or in terms of reset procedures? Further info on attached pictures.
Thank you in advance.