Hello all
I am really frustrated about this
The car is a 2010 Mondeo MK4 2.0 TDCi with the DW10C engine (one of the first with this engine.)
I have changes CCC via asbuilt, then I use the function "allow central configuration Data Parameter (CDP) Learning. (It says completede in 2 seconds)
Then i reset all adaptations.
BUT, the result is not there. The torque drop off is at 2800rpm, not 3400 as it should be with the 163 fuel map.
What can I do?
Regards Tommy
Mondeo MK4 2.0TDCi DW10C 140->163 bhp troubles
Модератор: DanMc85
-
- Сообщения: 4
- Зарегистрирован: 23 сен 2018, 17:29
-
- Сообщения: 4
- Зарегистрирован: 23 сен 2018, 17:29
Re: Mondeo MK4 2.0TDCi DW10C 140->163 bhp troubles
If i try the CCC learning, under the PCM reprogramming tab, i can se UCDS connect to the PCM, and but then it says Error:Invalid key (0x35)
У вас нет необходимых прав для просмотра вложений в этом сообщении.
-
- Сообщения: 6
- Зарегистрирован: 04 апр 2018, 23:06
Re: Mondeo MK4 2.0TDCi DW10C 140->163 bhp troubles
On this calibration you can not change map to 163 BHP.
You must update PCM to e.g. BG91-14C204-BP
You must update PCM to e.g. BG91-14C204-BP