2015 Escape 1.6L AT 2WD PCM dead module

Модератор: DanMc85

Ответить
sagis
Сообщения: 4
Зарегистрирован: 10 апр 2018, 17:31

2015 Escape 1.6L AT 2WD PCM dead module

Сообщение sagis »

Hello,need help!
I connect PCM module from another used car and with IDS program reprogramming VIN code and ignition key,
Engine crank but no start.I scaning all module with UCDS and Forscan does not show any errors.
When I do the test PCM with Forscan I get two errors
PCM P1116-00-Engine Coolant Temperature Sensor Out Of Self Test Range
PCM P1711-00-Transmission Fluid Temperature Sensor Out Of Self Test Range

Where's the problem? Maybe not compatible PCM module?

My orginal dead PCM module 2015 Escape Titanium 1.6L AT 2WD
P/N FJ5A-12A650-DC
H/W FJ5A-12B684-BA

PCM module from used car 2014 Escape SE 1.6L AT 2WD
P/N EJ5A-12A650-TB
H/W CV6A-12B684-CA
У вас нет необходимых прав для просмотра вложений в этом сообщении.

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: 2015 Escape 1.6L AT 2WD PCM dead module

Сообщение kroligoff »

Other year Escape have different sensors. Need flash firmware use you year sensors.

Use VBF Loader Load:
SBL: DL3A-14C273-AC
FJ5A-14C204-DD

sagis
Сообщения: 4
Зарегистрирован: 10 апр 2018, 17:31

Re: 2015 Escape 1.6L AT 2WD PCM dead module

Сообщение sagis »

Today i flashing this firmware as you said FJ5A-14C204-DD But when I do the test PCM with Forscan I get now four errors.
Nothing changes
When push the START button ,engine crank and the starting sound comes,engine speed rises to 600 rpm and nothing more.

I bought this used PCM from ebay and don't know what to do next, maybe PCM its ok,but hardware types are not the same and incompatible for my car?

Спасибо за ответ,я понимаю по русски, можешь писать по русски!
У вас нет необходимых прав для просмотра вложений в этом сообщении.

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: 2015 Escape 1.6L AT 2WD PCM dead module

Сообщение kroligoff »

Очень странно, хотя бы по температуре должно уйти, возможно в проводке дело?

sagis
Сообщения: 4
Зарегистрирован: 10 апр 2018, 17:31

Re: 2015 Escape 1.6L AT 2WD PCM dead module

Сообщение sagis »

I think so too problem in engine wire harness,i see in the schematic S123 splitter maybe don't have good contact.
S123 splitter direct connecting to Engine Coolant Temperature Sensor,Transmission Fluid Temperature Sensor and MAP Pressure Sensor?
I'll check tomorrow engine wire harness S123 splitter and I will report result.

Спасибо за помощь!
.
У вас нет необходимых прав для просмотра вложений в этом сообщении.

sagis
Сообщения: 4
Зарегистрирован: 10 апр 2018, 17:31

Re: 2015 Escape 1.6L AT 2WD PCM dead module

Сообщение sagis »

Hello!
I spent a lot of time repairing this car.
I don't know why this happened, what could have killed a lot of parts ??? Maybe the effects of lightning with thunder? (последствия молнии)
I replaced total 10 units broken parts!

Broken parts:
1 PCM
2 Ignition Coils 4 units
3 Cranshaft sensor
4 Camshaft sensors 2 units
5 Fuel Rail sensor
6 MAP sensor

Now the car engine start and driving and do not have any errors!

Спасибо за помощь!

sev611
Сообщения: 74
Зарегистрирован: 06 ноя 2016, 20:54
Откуда: Copenhagen

Re: 2015 Escape 1.6L AT 2WD PCM dead module

Сообщение sev611 »

try to look at your generator it migth be the problem if it pulls out 18-19volt it will kill parts in random

Ответить