IPMA missing calibration data

[adyboss]

Hi,

I've checked the IPMA details and found the following:

<m module="IPMA">

<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-FU5A-17E678-SC"/>

<d DID="F111" Desc="ECU Core Assembly Number" Data="FS7T-14G025-SE"/>

<d DID="F113" Desc="ECU Delivery Assembly Number" Data="FU5A-17E678-SE"/>

<d DID="F120" Desc="ECU Software #2 Part Number" Data="FT4T-14G082-MD"/>

<d DID="F124" Desc="ECU Calibration Data #1 Number" Data=""/>

<d DID="F125" Desc="ECU Calibration Data #2 Number" Data=""/>

<d DID="F162" Desc="Software Download Specification Version" Data=""/>

<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>

<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="FS7T-14G019-SE"/>

</m>

So... I've found update available but also found that I have no "ECU Calibration Data #1 and #2" data!

Simulating an update to the IPMA module I saw that two other config files (approx 14 MB) will be downloaded.

What I have now (SE):




Update possible to SK:




Any idea why this Calibration data/files are missing on my current configuration?
I have to say that everything looks to work normal on my car.

Cheers.

[adyboss]

Hello,
Nobody made any update to IPMA module???

[auto-hentzschel]

why you will update the IMPA?
updates with UCDS don't work often. If you system works, don't touch it!
important updates I only do with FDRS/PTS

[adyboss]

I don't know why you say that "updates with UCDS are not working often...
As I wrote, "Calibration data/files are missing on my current configuration". That's why I want to update.
I also said "it looks to work OK" but I may have a problem with my front camera.
Coming back... Any idea why/how the calibration data/files are missing on my current configuration?

[auto-hentzschel]

if you have the current firmware and the bootloader downloaded in your folder, then you can try it. You can go back every time.
I'm personally think not that the IMPA work with front cam. what do you have any DTC?

[Diamondear]

I have performed the update and everything has gone smoothly.

See here: https://www.ucdsys.ru/forum/viewtopic.php?f=31&t=1191

[adyboss]

Hi Diamondear,
You've made the update with "update wizard" or with VBF-Loader?

[Diamondear]

Hi Diamondear,
You've made the update with "update wizard" or with VBF-Loader?

With Update Wizard


https://www.ucdsys.ru/forum/download/fi ... &mode=view

[Ramper]

Have u figured out how to fix your problem?
If not try this:
Use vbf file loader and select files in order:
019
024
081
082
Also select hs2 for every line
For me personally I had to do second run with file 81 left it out of first run it was still failing on the config file

[adyboss]

I'm sure it's working with the update wizard too...
The question was why it's missing (I have no errors) and why are available only after some later versions.

[Ramper]

The wizard is beta so I guess they are stil figuring out the correct file assigned.