Mustang 2016 BCM dead after update - help

[Gregor]

ja aber es sind andre Funktionen gestört.

[auto-hentzschel]

was funktioniert denn nicht?

[Gregor]

Mein APIM ist weg wie kann ich den loder Eisteilen ???

module="APIM">
<d DID="F0E9" Desc="Private Sub Node #2 Software Number" Data=""/>
<d DID="F10A" Desc="ECU Cal-Config Part Number" Data="DemoAudioProfile"/>
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-GB5T-14G371-CB"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="HB5T-14G380-BA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="HB5T-14G371-CAG"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="GB5T-14G375-CA"/>
<d DID="F12B" Desc="Private Sub Node #3 Part Number" Data=""/>
<d DID="F12C" Desc="Private Sub Node #4 Part Number" Data=""/>
<d DID="F141" Desc="Private Sub Node #1 Serial Number" Data="WV7N048Z"/>
<d DID="F142" Desc="Private Sub Node #2 Serial Number" Data=""/>
<d DID="F162" Desc="Software Download Specification Version" Data=""/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F16B" Desc="ECU Cal-Config #2 Part Number" Data=""/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="GB5T-14G374-CB"/>
<d DID="F18C" Desc="ECU Serial Number" Data="0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF"/>
<d DID="F1D0" Desc="ECU MAC Address 1" Data="0xB00xD50xCC0xEC60x89"/>
<d DID="F1D1" Desc="ECU MAC Address 2" Data="0xB00xD50xCC0xEC60x8A"/>
<c DID="DE00" Desc="Direct Configuraation DID DE00" Data="6A2A050300028800008A"/>
<c DID="DE01" Desc="Direct Configuraation DID DE01" Data="55530602C002008000000005"/>
<c DID="DE02" Desc="Direct Configuraation DID DE02" Data="0000010100"/>
<c DID="DE03" Desc="Direct Configuraation DID DE03" Data="01000900060001"/>
<c DID="DE04" Desc="Direct Configuraation DID DE04" Data="1856195A29D6"/>
<c DID="DE05" Desc="Direct Configuraation DID DE05" Data="80"/>
<c DID="DE06" Desc="Direct Configuraation DID DE06" Data="100033000000000B65000056566D004C"/>
</m>

[Shurka]

vergleich mal deine uuw-Dateien mit jetzt und vor dem Update. Hast du davon Backup gemacht?

[AmigaSurfer]

Mein APIM ist weg wie kann ich den loder Eisteilen ???

There is already a thread about dead Sync 3!

More information about what have you done with your Sync 3 and does the APIM still works or shows only a black screen are helpful.

The files mentioned in the threat about dead Sync 3 are for a Mondeo MK5. Your APIM seems to have an other ECU Calibration Data #1 Number.

If your Sync 3 is dead, because you flashed an ECU Cal-Config #2 Part together with the Vehicle Manufacturer ECU Software File: GB5T-14G374-CB, then try this files in the VBF-Loader:
Secondary Bootloader: GB5T-14G376-AA
Vehicle Manufacturer ECU Software File: GB5T-14G374-CB
ECU Cal-Config Part: GB5T-14G379-AA
ECU Calibration Data #1: GB5T-14G375-CA

[Gregor]

Das APIM ist wider da un funktioniert leider kommt da kein ton raus
DACM-C
FCDMIM
GPSM
ICM sind noch nicht wach...

[Gregor]

the apim works but the other controllers are not yet asleep
DACM C
FCDIM
GPSM
ICM

[Gregor]

The apim works but the other ECUs are dead
DACM C
FCDIM
GPSM
ICM